Caretaker Medical

CNIBP and Vital Signs monitoring

CareTaker 4

CareTaker is the worlds most innovative patient monitor Using only a simple finger cuff to measure Continuous Beat-by-Beat Blood Pressure (“cNIBP”), Heart Rate, and other physiological parameters enabling safe, secure, and accurate remote patient monitoring via our secure Android App, HIPPA-compliant Cloud Portals, or interfaced with other patient monitoring systems. CareTaker sets a new standard in mobility, simplicity, and cost, enabling continuous realtime monitoring as patients traverse the full continuum of care, within the hospital, during transport, and after discharge.

Traditionally, accurate cNIBP monitoring has been limited to invasive catheters or expensive complicated machines used only in critical care settings. CareTaker’s low-cost, small, comfortable form factor, and intuitive design brings “ICU Quality” cNIBP capabilities to virtually any setting. The benefits of gathering blood pressure measurements continuously over a time interval are well documented and significantly better that intermittent “single-point-in-time” blood pressure readings from cumbersome upper arm cuff squeezes, which are susceptible to errors, often yield incorrect results, and can miss underlying hemodynamic problems.

Using our FDA Approved finger-cuff and Pulse Decomposition Analysis technology, CareTaker non-invasively and continuously measures Beat-by-Beat Blood Pressure within AAMI accuracy standards, enabling clinicians to monitor patient vitals, pressure waveforms, from virtually anywhere. CareTaker’s integrated multi-mode radios are pre-configured to securely transmit data over cellular networks or to Bluetooth devices without the need to implement complex communications or connectivity networks. Clinicians simply attach the finger cuff and wrist unit to patients and immediately begin measuring vitals and view the data on a tablet or connected Nurse Station Monitor, alternatively the data can be transmitted directly into the Patient’s Electronic Medical Record (EMR).

Because CareTaker has an integrated low-energy Bluetooth radio, it can function as a “Wearable Hub”, collecting data from other Bluetooth devices such as Glucometers, Weight Scales, Thermometers, Spirometers, etc. and display the data for remote viewing. In addition to the FDA Approved cNIBP, Heart Rate, and pulse waveform functions, CareTaker can provide healthcare staff with changing health conditions. Providing early intervention and rapid response to a patients changing health conditions.

What can it monitor ?

CNIBP – Continuous Non-invasive Blood Pressure (cNIBP) beat by beat monitoring via a single finger cuff.

Heart Rate -Heart rate measurement equivalent to traditional 3 wire ECG, providing visualisation of rhythm and pulse features.

Blood Oxygen – SP02 is measured via an optional Bluetooth finger clip

Respiration Rate – Provides “Real Time” accurate measurement of respiration

Core Body Temperature – Temperature monitoring from a remote patch or thermometer.

Early Warning Score – EWS is integrated into the early detection of the Caretaker device

Blood Volume – Developed for occult bleeding caused by blunt trauma

Other Parameters – Other hemodynamic parameters and data collection can be obtained through Bluetooth connected devices

• Ultra slim modern aesthetic design
• 5-Wire resistive touchscreen
• Full Flat HD+ 16:9 TFT Display (LED backlit)
• Intel Baytrail T/CR
• High resolution CCD camera
• Integrated stereo speakers
• Capacitive GPIO front control buttons
• Fanless low power platform
• Antibacterial casing materials
• Smart Card Reader
• RFID reader
• 2x Headphone jacks
• 2x USB ports
• Accessory docking ports
• VoIP phone handset
• Phone cradle and on/off hook sensor
• Top mount arm hinge

• Projective Capacitive touchscreen
• WiFi/Bluetooth connectivity
• RFID (HF & LF) card readers
• Power over Ethernet (PoE)
• VESA mounting
• Solo Link connectivity
• VOIP multifunction handset + barcode scanner
• UL Certified AC/DC PSU

• EMI Test – CE Class B, FCC Class B, MDD IEC/EN 60601-1
• Safety – UL/IEC/EN60601-1
• Environmental – IP65 front IP 54 Rear
• Vibration – Standard (0.00454GHz,1.5Grms 5-500Hz)
• Shock – Standard
• Drop – EC-60068-2-32 (96.5cm)

+ FEATURES

• Ultra slim modern aesthetic design
• 5-Wire resistive touchscreen
• Full Flat HD+ 16:9 TFT Display (LED backlit)
• Intel Baytrail T/CR
• High resolution CCD camera
• Integrated stereo speakers
• Capacitive GPIO front control buttons
• Fanless low power platform
• Antibacterial casing materials
• Smart Card Reader
• RFID reader
• 2x Headphone jacks
• 2x USB ports
• Accessory docking ports
• VoIP phone handset
• Phone cradle and on/off hook sensor
• Top mount arm hinge

+ OPTIONS

• Projective Capacitive touchscreen
• WiFi/Bluetooth connectivity
• RFID (HF & LF) card readers
• Power over Ethernet (PoE)
• VESA mounting
• Solo Link connectivity
• VOIP multifunction handset + barcode scanner
• UL Certified AC/DC PSU

+ COMPLIANCE

• EMI Test – CE Class B, FCC Class B, MDD IEC/EN 60601-1
• Safety – UL/IEC/EN60601-1
• Environmental – IP65 front IP 54 Rear
• Vibration – Standard (0.00454GHz,1.5Grms 5-500Hz)
• Shock – Standard
• Drop – EC-60068-2-32 (96.5cm)

Product Testing

Caretaker Medical have developed the CareTaker 4 wearable wireless vital signs monitoring system to set a new standard in portability, simplicity, and medical-grade patient monitoring.  Using a small, comfortable finger cuff, CareTaker accurately measures continuous non-invasive beat-by-beat Blood Pressure (“cNIBP”), ECG-Accurate Heart Rate, and Respiration Rate, as well as Blood Volume (for hemorrhage detection), Arterial Stiffness, and other hemodynamic parameters.

Clinical trials have validated that CareTaker measurements are equivalent to other cNIBP  patient monitors and heart rate methods. The company anticipates that its innovative approach to vital sign monitoring will be widely accepted in the medical community while disrupting existing patient monitoring solutions.

Expert Support

At Remedi we want your implementation to be a success, so our experienced project design and management team works closely with all of your project stakeholders at all stages  – from technical architecture design, physical installation, setting up of services, integration with existing applications and system configuration through to system go-live.

Need more information on Remedi's products and services?

We are happy to help! Just click below and fill out the contact form.

image
http://www.remedi-tech.com/wp-content/themes/blake/
http://www.remedi-tech.com//
#1573ba
style1
paged
Loading posts...
/dom20473/
#
on
none
loading
#
Sort Gallery
http://www.remedi-tech.com/wp-content/themes/blake
on
yes
yes
off
Enter your email here
on
off