Medi-Link – 15.6″

Smart Bedside Computer

Medi-Link 15.6″

The Remedi Medi-link range of healthcare displays are configured for use in different applications. The modern design is both stylish, practical and ideally suited for demanding environments.

The Medi-Link 15.6″ healthcare display  is configured as a separate display and control box (M-Hub). This healthcare terminal solution encloses future proof hardware for partners and end users. The flexible platform enables different computing solutions to be fitted at a later date. Challenges of increased power and weight are also easily resolvable in this configuration.

The healthcare display range incorporates a high quality LCD display, touchscreen and internal electronics. These electronics link to the M-Hub computer. During installation, the display mounts to an arm fixed to bedside furniture or the headwall. The arm articulates the screen to provide the patient with easy access to application. It also equips medical staff with access to clinical record and workflow data.

Medi-Link 15.6″ healthcare display is perfect in applications and wards such as bedside point of care, dialysis, ICU and medical carts.

• Projective Capacitive touchscreen
• Wi-Fi/Bluetooth connectivity
• RFID (HF & LF) card readers
• Power over Ethernet (PoE)
• VESA mounting
• Solo Link connectivity
• VOIP multifunction handset + barcode scanner

• Ultra slim modern aesthetic design
• 5-wire resistive touchscreen
• Full Flat HD+ 16:9 TFT Display (LED Backlit)
• High resolution CCD camera
• Integrated stereo speakers
• Capacitive GPIO front control buttons
• Fanless low power platform
• Antibacterial casing materials
• Smart Card Reader
• RFID reader
• 2 x Headphone jacks
• 2 x USB Ports
• Accessory docking ports
• VoIP phone handset
• Phone cradle and on/off hook sensor
• Top mount arm hinge

• Mother Board: Remedi ECM-KA eKabini GX217GA 3.5” SBC
• System Memory: DDR3 SODIMM 4GB DDR3 1600 SDRAM
• Storage: 32GB, 2.5” SATA II SSD
• Cooling: Fan-less heatsink for the M/B
• Power supply: 19V/90W AC-to-DC power adaptor
• PSU AC-to-DC: 250V/5A AC- to- AC fused terminal block
• CPU: AMD Embedded G-Series Dual-core GX-217GA 1.6GHz SoC
• BIOS: AMI uEFI BIOS, 32Mbit SPI Flash ROM
• System Chipset: AMD SoC Integrated
• I/O Chip: IT8518VG
• System Memory: One 204-pin DDR3 SODIMM – 8GB DDR3 1600 SDRAM
• SSD: CompactFlash Type I/II Socket (Support InnoDisk CF-SATA)
• H/W Status: Monitoring Temperature, Voltage Throttling Control
• Expansion: 1 x Mini PCIe (mSATA Supported)
• Power Requirement: Full range 100V~240V AC-in
• Power Connector: AC terminal block to accept 2 stripped pins
• Operating Temp: 0~40˚C (32~104˚F)
• Storage Temp: -20~60˚C (-4~140˚F)
• Relative Humidity: 5~90% Relative Humidity, Non-condensing
• Mounting: 4-point mounting per chassis design
• Dimension: 309.14mm x 270.75mm x 103.93mm (Excluding the arm post)
• Weight: 4.5 kg

• 2 x SATA III + 2 x Power Connector
• 1 x COM RS-232 (Header)
• 1 x K/B & Mouse (Header)
• USB 2 x USB 3.0, 2 x USB 2.0
• DIO 4-bit GPI, 4-bit GPO

• EMI Test – CE Class B, FCC Class B, MDD IEC/EN 60601-1
• Safety – UL/IEC/EN60601-1
• Environmental – IP65 front IP 54 Rear
• Vibration – Standard (0.00454GHz,1.5Grms 5-500Hz)
• Shock – Standard
• Drop – EC-60068-2-32 (96.5cm)

+ FEATURES

• Projective Capacitive touchscreen
• Wi-Fi/Bluetooth connectivity
• RFID (HF & LF) card readers
• Power over Ethernet (PoE)
• VESA mounting
• Solo Link connectivity
• VOIP multifunction handset + barcode scanner

• Ultra slim modern aesthetic design
• 5-wire resistive touchscreen
• Full Flat HD+ 16:9 TFT Display (LED Backlit)
• High resolution CCD camera
• Integrated stereo speakers
• Capacitive GPIO front control buttons
• Fanless low power platform
• Antibacterial casing materials
• Smart Card Reader
• RFID reader
• 2 x Headphone jacks
• 2 x USB Ports
• Accessory docking ports
• VoIP phone handset
• Phone cradle and on/off hook sensor
• Top mount arm hinge

+ I-Hub SPEC

• Mother Board: Remedi ECM-KA eKabini GX217GA 3.5” SBC
• System Memory: DDR3 SODIMM 4GB DDR3 1600 SDRAM
• Storage: 32GB, 2.5” SATA II SSD
• Cooling: Fan-less heatsink for the M/B
• Power supply: 19V/90W AC-to-DC power adaptor
• PSU AC-to-DC: 250V/5A AC- to- AC fused terminal block
• CPU: AMD Embedded G-Series Dual-core GX-217GA 1.6GHz SoC
• BIOS: AMI uEFI BIOS, 32Mbit SPI Flash ROM
• System Chipset: AMD SoC Integrated
• I/O Chip: IT8518VG
• System Memory: One 204-pin DDR3 SODIMM – 8GB DDR3 1600 SDRAM
• SSD: CompactFlash Type I/II Socket (Support InnoDisk CF-SATA)
• H/W Status: Monitoring Temperature, Voltage Throttling Control
• Expansion: 1 x Mini PCIe (mSATA Supported)
• Power Requirement: Full range 100V~240V AC-in
• Power Connector: AC terminal block to accept 2 stripped pins
• Operating Temp: 0~40˚C (32~104˚F)
• Storage Temp: -20~60˚C (-4~140˚F)
• Relative Humidity: 5~90% Relative Humidity, Non-condensing
• Mounting: 4-point mounting per chassis design
• Dimension: 309.14mm x 270.75mm x 103.93mm (Excluding the arm post)
• Weight: 4.5 kg

• 2 x SATA III + 2 x Power Connector
• 1 x COM RS-232 (Header)
• 1 x K/B & Mouse (Header)
• USB 2 x USB 3.0, 2 x USB 2.0
• DIO 4-bit GPI, 4-bit GPO

+ COMPLIANCE

• EMI Test – CE Class B, FCC Class B, MDD IEC/EN 60601-1
• Safety – UL/IEC/EN60601-1
• Environmental – IP65 front IP 54 Rear
• Vibration – Standard (0.00454GHz,1.5Grms 5-500Hz)
• Shock – Standard
• Drop – EC-60068-2-32 (96.5cm)

Product Testing

All aspects of the project will be designed to fit in with your existing infrastructure (technical and physical), service delivery methodology and operational ethos. As part of our meticulous pre-planning, we typically test all technology supplied by our partners before delivery to your site to minimise disruption so you can start delivering real ROI as soon as possible.

We have experience of successfully delivering successful projects and are happy to pass on the lessons that we, and our other customers, have learnt as to works best to further accelerate your project success.

Expert Support

At Remedi we want your implementation to be a success, so our experienced project design and management team works closely with all of your project stakeholders at all stages  – from technical architecture design, physical installation, setting up of services, integration with existing applications and system configuration through to system go-live.

Need more information on Remedi's products and services?

We are happy to help! Just click below and fill out the contact form.

image
http://www.remedi-tech.com/wp-content/themes/blake/
https://www.remedi-tech.com//
#1573ba
style1
paged
Loading posts...
/www/remeditech_146/public/
#
on
none
loading
#
Sort Gallery
http://www.remedi-tech.com/wp-content/themes/blake
on
yes
yes
off
Enter your email here
on
off